53
Quality:
When connecting an analog camera, set the camera quality,
there are ordinary, good, better, the best option.
Frame Rate:
Set the camera frame rate to
1 frames / sec-25 frames /
sec.
BitRate (Kb/S):
Setting bit rate can change the picture quality, the larger
the bit rate and the better the picture quality.
Refer Bitrate (Kb/S):
Shows the bit rate range of the main and sub code
streams.
Copy
:
Copy the channel parameter settings to other channel.
5.3.5 Camera
5.3.5.1 Add Camera
Add Camera
The XVR add device is used to add a network camera, and the interface only
displays the IP channel. After adding a network device, you can view the
video screen of the network device directly on the XVR, and perform
operations such as storage and management. Different devices support
different numbers of network devices. You can add required network devices
based on actual conditions. Add the device as follows:
Step 1:
In the Menu interface, click "Camera → Add Camera", or right-click in
preview interface and select "Add Camera" to enter the Add Camera
interface, as shown in Figure 5-19
○
1
.
Step2:
Click "Add → select device to Add → Add →select channel to add→
Save→ Cancel", complete to add device.