123
Figure 6-35
6.5.6.4 Auto Maintain
In the main interface, click "Configuration →Maintain →Auto Maintain" to
enter the auto maintain interface, as shown in Figure 6-36. Here you can set
the device reboot time, the auto maintenance settings and NVR settings
consistent.
Figure 6-36
6.5.6.5 Restore Default
Set the restore default to restore the device default parameters to the
factory defaults.
The default steps to restore are as follows:
Step 1:
In the main interface, click "Configuration →Maintain →Restore
Default" to enter the restore default interface, as shown in Figure 6-37.
Step 2:
Select the parameters you want to restore, such as "Record ".
Step 3:
Click "Save" and the selected parameters are restored to the factory
defaults.