Heico EMD Epsilon EPS 45-80, Техническое руководство

Страница: 85 / 262

3. Interfacing
Technical Manual P/N 9894.00.G6
3-27
Optional Photodiode Ion Chamber Fluoro Board
The optional Photodiode Ion Chamber Fluoro P/N 11030.000 provides 2 programmable outputs
with selectable polarity and voltage level (Table 45).
Table 45- Selectable Polarity & Voltage on Programmable Outputs - P/N 11030.000
Connector Pin Typical Interfacing Description
4
J3
5
Outputs can be active low or high (selectable polarity), and the voltage
value of the output at high level is programmable from 4 to 24 V. This is
done using the
Epsilon PC Tools program, as described in Chapter 4.
3.5.2 Types of Programmable Outputs
Using the Epsilon PC Tools program, every digital output can be programmed to be active during
specific generator conditions:
1
. Client
Programmable outputs (§ 3.5.2.1); 5. Heat Units Output (§ 3.5.2.5);
2. X-ray On Alarm (§ 3.5.2.2); 6. Operator Console Function keys (§ 3.5.2.6);
3
.
X-ray On signal (§ 3.5.2.3); 7
. I. I. Magnification outputs
(*)
.
4. Frame Rate output bit “n” (§ 3.5.2.4);
(*)
I.I. Magnification outputs are used only on generators with High
Performance Pulsed Fluoro. Refer to Technical Manual Supplement
P/N 11050.012 in the electronic documentation CD.