Heico EMD Epsilon EPS 45-80, Техническое руководство

Страница: 23 / 262

1. Introduction to
Epsilon
HF Generator
Technical Manual P/N 9894.00.G6
1-5
1.1.3 EPS High-Voltage Generator — Options
Epsilon Operator Console P/N 9777.xx
An elegant X-ray control panel that affords simple control of the EPS High-Voltage generator.
Depending on configuration, the console controls between 4 and 6 workstations with more than
2000 APR exams divided in 3 or 4 patient sizes.
Exposure buttons, optical density correction, and many feedbacks from the X-ray room and/or
X-ray tube are provided. The technique factors are quickly available for both pre-exposure and post-
exposure visualization.
Figure 1.2 – Graphic Screen on the Epsilon Operator Console.
The console also includes a built-in service mode and a diagnostic mode, displayed in a graphic
screen. Connection to the generator is carried out by a 23.6-m (50-foot) console cable (other cable
lengths are optional).
Rotor Controller P/N 9962.xx or P/N 11104.xxx
Microprocessor-controlled electronic board that powers the anode rotation at low (60 Hz) or dual
speed (60/180 Hz), for one or two X-ray tubes. Anode rotation is independent of mains line
frequency. The Epsilon Rotor Controller supports most common stator types.
Two-Tube Option P/N 10020.000
The 2-Tube option provides a standalone X-ray tube switch and the necessary hardware & software
to drive two different X-ray tubes from a single generator. Optionally, the 2-tube assembly can be
enclosed in a decorative cabinet.
High Performance Radiography P/N 10010.000
High Performance Radiography option is available on EPS 80 configurations only. It extends the
irradiation time from 10 seconds to 63 seconds, and the mAs factor from 1000 up to 12,500 mAs on
some very high capacity X-ray tubes.