Heico EMD Epsilon EPS 45-80, Техническое руководство

Страница: 124 / 262

EPS 45-80 High-Voltage Generator
4-26
Technical Manual P/N 9894.00.G6
4.5.2 Programmable Inputs/Outputs Configuration
Input and output signals can be customized for certain functions or peripheral equipment.
Many I/Os are provided on the Controller board. Additional I/Os are provided by expansion
boards (optional boards) connected onto the Expansion Motherboard.
1.
Make sure the Expansion board configuration is done in the Options setup (Section 4.3.1).
2.
In the menu bar, select View and Inputs to invoke the Programmable Inputs configuration screen
(Figure 4.15).
The appearance of this screen varies as a function of the generator hardware.
Figure 4.15 – Input Configuration Screen.
Programmable Inputs Configuration
3. For every input line interfaced with the generator, specify the type of input (Table 48), which
application it will serve, and for which workstation(s) it will be used.
a.
For interlock type inputs, enter the name of the interlock to be displayed on the graphic
screen during interlock condition (use 10 characters maximum).
b. If the Fluoro Photodiode board (PhD tab) is present on the generator, set
up the signal activation polarity and choose a voltage (0 to 24 V) for the
termination resistor.