142
•
To remove all IP addresses, use the
undo ip address
command without any parameter.
•
To remove the primary IP address, use the
undo ip address
ip-address
{
mask
|
mask-length
}
command.
•
To remove a secondary IP address, use the
undo ip address
ip-address
{
mask
|
mask-length
}
sub
command.
Related commands:
display ip interface
(
Layer 3—IP Services Command Reference
).
Examples
# Specify the IP address as 1.1.0.1, the subnet mask as 255.255.255.0 for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip address 1.1.0.1 255.255.255.0
name
Syntax
name
text
undo name
View
VLAN view
Default level
2: System level
Parameters
text
: Specifies the VLAN name, a string of 1 to 32 characters. Spaces and special characters can be
included in the name.
Description
Use the
name
command to configure a name for the current VLAN.
Use the
undo name
command to restore the default name of the VLAN.
The default name of a VLAN is its VLAN ID,
VLAN 0001
for example.
When 802.1X or MAC address authentication is configured on a switch, you can use a RADIUS server
to issue VLAN configuration to ports that have passed the authentication. Some servers can send IDs or
names of the issued VLANs to the switch. When there are a large number of VLANs, you can use VLAN
names rather than VLAN IDs to better locate VLANs.
Examples
# Configure the name of VLAN 2 as
test vlan
.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] name test vlan
reset counters interface vlan-interface
Syntax
reset counters interface
vlan-interface
[
vlan-interface-id
]
