GVS K-BUS
○
R
KNX/EIB
Thermostat
www.video-star.com.cn
Tel.
：
（
8620
）
39338986
Fax.
：（
8620
）
39338465
13
and humidity and will not control it; When logic functions are banned, the logic operation from
Thermostat will be disrupted as well as the control of this function.
3.8 timing function
Thermostat offers 16 timing time, so users can set the timing time regularly according to their using
habits, which automatically adjust the working mode and send the appropriate value. When arrived at
timing time, it can automatically switch to the corresponding working mode and the corresponding
numerical values.
3.9 binary input and temperature sensor input
Thermostat offers binary input and three roads, which is used to switch, dimming, curtains and
scene controls. One way is externally connected to temperature sensor input, which can be a NTC
thermistor as an external temperature sensor, or as a floor heating temperature limiter, stops heating
when floor heating is higher than the limited temperature heating.
4. Parameter setting description in the ETS
4.1 overview
Thermostat can be set at different control modes according to users’ needs; here we introduce the
database settings of Thermostat below.
4.2 parameter Settings window "General"
"General" parameter Setting interface as shown in figure 4.2, the interface are mainly some of the
general Thermostat parameter Settings, such as the choice of heating and refrigeration control functions
by temperature control , LCD backlight brightness parameter setting, and so on.
