GVS K-BUS
○
R
KNX/EIB
Thermostat
www.video-star.com.cn
Tel.
：
（
8620
）
39338986
Fax.
：（
8620
）
39338465
63
restored, but only when the parameter "Reaction on closing the contact(rising edge)/ opening the
contact(falling edge)",
and all options don't select "Toggle",
will it send
the current switch value of
"Switch, X" to the bus; if any of the options selects "Toggle",
no value will be sent in the bus. If the
current operation is "No reaction" or "Stop cyclic transmission", no value will be sent.
Parameter "Cyclical send Tele. Switch'"
Options: no
always
if switch off
if switch on
Here is to set whether to cyclically send the current switch value of “Switch, X" to the bus.
Parameter option "Always" is selected, regardless of the object "Switch, X" in the current switch
value is 0 or 1; the switch will send cyclically the current value to the bus. Parameter option is set as "If
switch off" or "If switch on", Only when the current value is the same as the option, the value will be
cyclically sent.
Parameter "Interval of Tele. Cyclic send
：
Base × Factor"
Base Options
：
0.5s/1s/ …/1h
Factor Options
：
1…255
Here set the interval of cyclically sending telegrams, the parameter is visible when setting cyclically
sending, its cycle: Base × Factor
4.12.2
Switch/Dimming
In parameter window "Input 1/2/3", select "Switch/Dimming" in "Function of input 1 /2/3", seen in
Figure 4.12.3. After this function is enabled, user through one input operation can control switching and
dimming devices simultaneously.
