Grizzly G0841 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 84

Grizzly G0841 Скачать руководство пользователя страница 48

-46-

Model G0841 (Mfd. Since 06/18)

order online at

www.grizzly.com

or call

1-800-523-4777

Figure

59. Model T28369 Heavy-Duty Roller

Table.

T28369—14" x 78" Heavy-Duty Roller Table
Increase  material  handling  and  processing  effi-
ciency with this Heavy-Duty Roller Table. Simply
place a roller table on one or both sides of your
machine  and  production  time  is  automatically
improved!.  Adjustable  legs  for  28"  to  48"  work-
ing  height,  17"  wide  material  capacity,  440  lb.
Capacity!

D2273—Single Roller Stand

D2274—5 Roller Stand
These  large  diameter  ball  bearing  roller  stands
features  smooth  operation  for  a  variety  of  pro-
cessing  and  work  support  applications.  Each
stand is equipped with a heavy pedestal base for
added stability.

Figure 60. Models D2273 and D2274 Roller

Stands.

D2273

D2274

Figure 61. Model G0683HEP 10 HP Cyclone

Dust Collector.

G0638HEP—10 HP Cyclone Dust Collector
Equipped  with  a  dual-filtration  HEPA  filter  sys-
tem! Features a primary filter efficiency of 99.9%
at  0.2-2  microns,  and  a  secondary  HEPA  filter
efficiency  of  99.97%  at  0.3  microns  in  size.  Our
largest  cyclone  dust  collector  features  a  whop-
ping  4029  CFM  capacity  and  can  handle  any
large duct system with a static pressure loss less
than  16.8".  Dual  collection  drums  minimize  the
downtime when emptying dust and chips, and the
noise-reducing  exhaust  mufflers  keep  the  noise
level  below  90  dB.  The  ramped  air  intake  is  so
efficient, there is very little fine dust that makes it
to the plastic filter bags—and with a 99.9% filter
efficiency rating, essentially no dust escapes. The
perfect choice for large shops with multiple wood-
working machines operating at the same time, all
day long.

«
...
46
47
48
49
50
...
»

Содержание G0841





















































































Отзывы:

Нет отзывов