
-20-
Model G0841 (Mfd. Since 06/18)
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory (Figures 10–11)
Qty
A. Double-Sided Planer .................................. 1
B. Toolbox ....................................................... 1
C. Adjustable Wrench 10" ............................... 1
D. Ratcheting Drive
1
⁄
4
"
w/T-20 Torx Bits (5) .................................... 1
E. Pneumatic Screwdriver
w/Hose Adapter & Phillips Bits (2) .............. 1
F. Open-End Wrench 19/21mm ...................... 1
G. Open-End Wrench 12/14mm ...................... 1
H. Hex Wrench Set (1.5, 2, 2.5, 3, 4, 5, 5.5,
6, 8, 10mm) ................................................ 1
I. T-Handle Hex Wrench 4mm ....................... 1
J. Replacement Carbide Inserts (10-Pk)
w/Torx Head Screws M6-1 x 12 (20) .......... 1
K. T-Handle Drive
1
⁄
4
" w/T-20 Torx Bits (10) .... 1
L. Electrical Panel Lock-out Handle ............... 1
M. Block Gauge ............................................... 1
N. Hex Bolts M16-1.5 x 75
w/Hex Nuts M16-1.5 ................................... 4
O. Leveling Pads ............................................. 4
A
Figure 10. Inventory—machine.
Figure 11. Inventory—tools.
B
H
I
F
D
C
G
E
O
J
K
L
M
N
Содержание G0841
Страница 84: ......