
-8-
Model G0841 (Mfd. Since 06/18)
Headstock (Rear)
Base (Front)
Figure 4. Base (front) controls & components.
AB.
Upper Cutterhead Depth-of-Cut Scale
(1 of 2): Indicates final workpiece thickness
(i.e., distance from BDC of upper cutterhead
to planer table) in inches and millimeters.
AC. Lower Cutterhead Depth-of-Cut Scale:
Indicates amount of material to be removed
from bottom of workpiece (i.e., table offset) in
millimeters.
AD. One-Shot Oiler w/Reservoir: Pull lever
down to dispense oil onto infeed table sur-
face. Oiling table surface reduces friction
between workpieces and table surface. Use
oiler sparingly to avoid saturating workpieces.
AE. Infeed Table: Provides a smooth and
level surface to feed workpieces into lower
cutterhead (refer to
Infeed Table on Page 10
for more information).
AF. Infeed Table Handwheel: Rotate to raise or
lower infeed table (refer to
Infeed Table on
Page 10 for more information).
AG. Headstock Height Switch (1 of 2): Push UP
or DOWN buttons to quickly raise or lower
the headstock. Sets final workpiece thickness
(i.e., distance from BDC of upper cutterhead
to planer table).
AK. Emergency Stop Button (1 of 2): Push to
stop all machine functions and disable power
button. Remains in depressed position until
manually reset. Reset by twisting button
clockwise until it springs outward.
AL. Pressure Bar Adjustment Bolts: Adjust
bolts to set pressure bar height. Jam nuts
lock adjustment bolts in position.
AM. Dust Hood w/5" Dust Port: Covers upper
cutterhead to extract wood particles.
5" dust port provides connection to dust-
collection system. Remove hood to access
upper cutterhead, pressure bar, and pressure
rollers for service/maintenance.
AN.
Serrated & Upper Pressure Roller
Adjustment Rods (2 of 4): Adjust rods to
set serrated and upper pressure roller height.
Jam nuts lock adjustment rods in position.
AH.
Headstock Height Handwheel: Rotate
handwheel clockwise or counterclockwise
to precisely raise or lower the headstock in
0.1mm (0.004 in.) increments. Handwheel is
located at back of elevation motor.
AI. Lower Cutterhead Carriage w/Handle:
Provides access to lower cutterhead for
service/maintenance.
AJ. Elevation Chain Tensioner: Adjust to
increase or decrease tension on the eleva-
tion chain.
Figure 5. Headstock (rear) controls &
components.
AK
AL
AP
AQ
AO
AN
AM
AF
AI
AJ
AH
AB
AC
AE
AD
AG
Содержание G0841
Страница 84: ......