GRAUPNER 32032, Руководство по программированию

Страница: 122 / 324

122 Detail program description - Dual Rate / Expo | Winged models
0%
0%
0%
Aileron
Elevator
Rudder
DUAL
–––
SEL
–––
––– –––
100%
100%
100%
EXPO
SEL
Normal
3
Select the right-hand column at the lower edge of the
display marked with
SEL and activate the value fi eld
with a brief tap on the center SET key of the right
touch pad, the selection keys on the left or right touch
pad can now be used to alter the Expo value shown
in the highlighted fi eld, separately for each of the two
switch positions.
Now, for example, there is an opportunity to fl y with
a linear curve characteristic with the switch in one
direction, and to preset a value other than 0 % for the
other switch direction:
+50%
0%
0%
Aileron
Elevator
Rudder
DUAL
–––
SEL
–––
––– –––
100%
100%
100%
EXPO
SEL
Normal
3
At the same time, the Expo curve will be presented
in the graph. A simultaneous tap on the
cd or ef
keys of the right touch pad ( CLEAR ) will reset a
changed entry fi eld value displayed in inverse video
back to "0 %".
Some examples of Expo values:
Ser
v
o
tr
a
v
el
Ser
v
o
tr
a
v
el
Ser
v
o
tr
a
v
el
Stick deflection Stick deflection Stick deflection
Expo = +100% Expo = +50% Expo = –100%
In each of these examples, the Dual Rate value
equals 100 %.
Combining Dual Rate and Expo
If values have been entered for both the Dual Rate
and the Expo function, the effects of both functions
will overlap, for example, as follows:
Ser
v
o
tr
a
v
el
Ser
v
o
tr
a
v
el
Ser
v
o
tr
a
v
el
Stick deflection
Stick deflection
Stick deflection
Expo = +100%, DR = 125% Expo = +100%, DR = 50% Expo = –100%, DR = 50%
Asymmetric setting of Dual Rate and Expo
To make an asymmetric setting, i.e. a Dual Rate
or Expo setting dependent on the direction of
the respective joystick, fi rst access the »
Control
switch « menu and assign one of the C1 … C8
control switches – "C3", for example – to the desired
transmitter control, e.g. control 3 for the elevator
function. Do not change the switching point for
the joystick's neutral position (0 %). Now return
to the "Dual Rate / Expo" menu and select the
corresponding control function ("Elevator" in this
example).
Now, with a brief tap on the center SET key of the
right touch pad, activate the switch assignment
and change to the expanded switches then use the
selection keys to move on to the previously defi ned
"C3" control switch.
0%
0%
0%
Aileron
Elevator
Rudder
DUAL
––– –––
–––
SEL
–––
––– –t–
100%
100%
100%
EXPO
SEL
Moewünschten Schalter
toe die EIN Position
(erw. Schalter: SET)
Normal
Control/Logic/fix switch
C2 C4 C5 C6
C7 C8 FX FXi L1 L2
C1 C3
A brief tap on the center SET key of the right touch
pad will confi rm the assignment of this switch.
0%
0%
0%
Aileron
Elevator
Rudder
DUAL
––– –––
SEL
–––
––– –––
100%
100%
100%
EXPO
SEL
G3
Normal
Now use one of the selection keys to move into the
right column then move the elevator joystick into its
appropriate end-point to enter a separate Dual Rate
value for each direction, e.g. for "Up elevator" …
0%
0%
0%
Aileron
Elevator
Rudder
DUAL
––– –––
SEL
–––
––– –––
100%
77%
100%
EXPO
SEL
G3
Normal
… and "Down elevator":