GRAUPNER 32032, Руководство по программированию, Страница: 13 / 324

13 Remote control set description
integrated into the receiver make it possible, for
example, to match up
mapped servos with one
another
The programmable fail-safe functions »Hold«,
•
»Off« and »Move to preset positions« that are built
into the receiver for every individual servo channel
can be set separately
A slot for FAT or FAT32 formatted SD and SDHC
•
memory cards is available on the transmitter for
log fi les and model programs
Model programs
Transmitter operating time timer •
Flight phase switch assignments: six switches, two •
with a priority function. Every switch combination
can be named freely. This makes the number of
fl ight phases independent of the number of fl ight
phase switches.
Tail type normal, V-tail, Delta/fl ying-wing and 2 HR
•
Sv 3+8 (which immediately makes two coupled
elevator servos available without using free mixers
or dual mixers)
Flap count 4 AIL/4 FL: Full support of eight wing
•
servos, even without use of free mixers
Flight phase switching cutoff delay:
•
the delay time can be switched off for individual
channels on a fl ight-phase basis (e.g. for motor
off in electric models or to activate/deactivate
helicopter head lock).
Ten additional, user defi nable phase names: aside
from the prescribed fl ight phase names, the user
can also freely assign up to ten phase names of
his own choice.
Enhanced transmitter control menu: option to
•
assign input-side mid-point setting for C1 c
trim as a transmitter control. A single input can be
assigned to two switches for a true 3-way switch
function.
Wing mixers: New concept for the multi-fl ap menu
•
to simplify settings of one to eight wing servos on
a fl ight-phase specifi c basis in a comprehensible
manner without requiring the use of free mixers
»Info« sub-option in the Base setup model menu
•
Any kind of additional information about every
model can be entered here. This additional
information will then appear in the newly designed
model select function
»Logical switches«: this function permits two
•
switches to be coupled as »and« or »or« logic
functions. The result can be employed as a
virtual switch. Typical application: The activation
of certain functions should only be possible in
conjunction with other functions, e.g. wheel brake
can only be activated when the landing gear is
down. A number of functions which are normally
independent of one another, are to be put in their
base settings by way of an »Emergency switch«.
This program automation can be activated by
multiple switches that also select the appropriate
program.
Servo-middle setting range extended to ±125 %
•
Number of fl ight phases: (fi xed-wing: 8, helicopter: •
7 + AR)
Settable »Throttle too high« warning threshold
•
in the helicopter menu, programmable switch-on
warning
Time-frame can only be stopped, and thus also
•
erased, (if the timer switch is in its OFF position)
by touching the center
ESC key while the
ef
or
cd
selection keys are also being touched.
Phase trim for all axes of fi xed-wing models •
possible
Hotkey for servo display: one tap on the
• e and
f keys of the left CAP touch pad (touch sensitive
keys) will call up the servo display directly from
virtually all menus.
Servo occupancy swap on the receiver output
•
CAP TOUCH operating elements with key lock •
function to prevent unintentional operation.
CAP TOUCH display change from the main menu
•
to the telemetry main menu via ESC .
Numerous telemetry displays, programming •
functions and evaluation functions are presented
directly in the transmitter's screen
Graphic presentation of model icons for the model
•
type display (fi xed-wing/helicopter)
Built-in connector sockets for PC-USB interface,
•
headset, SMART BOX, external RF module,
DSC system. Prepared for teacher/pupil operation.
Teacher/pupil system with or without cable for
•
complete transfer; all settings are made on the
teacher transmitter.
Additional functions are planned for
•
implementation via software update.