GRAUPNER 32032, Руководство по программированию

Страница: 110 / 324

110 Detail program description - Control adjust | Winged models
0% +100% I5
I6
I7
I8
TYP
+100% 0.0 0.0
– –time+
0%
+100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
GL
GL
GL
fr
fr
fr
---
---
---
Offset
GL ---
Nor mal
7
Now put the 3-way switch back into its middle position.
Move the marker frame as necessary to the left into
the column labeled with the new switch symbol, briefl y
tap on the center
SET key of the right touch pad then
assign the switch's other switch direction by once
again starting from the middle position but this time
move the switch in the other direction.
The display will now present the given switch number
together with a symbol indicating the given switch
direction.
0% +100% I5
I6
I7
I8
TYP
+100% 0.0 0.0
– –time+
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
GL
GL
GL
fr
fr
fr
---
---
---
Offset
GL
Nor mal
7 8
Erasing a transmitter control or switch
assignment
A simultaneous tap on the
cd
or
ef
keys of
the right touch pad ( CLEAR ) while on an input
line with an active transmitter control or switch
assignment – see above fi gures – will reset the given
input back to "fr" and "---".
Tips:
When assigning switches, pay attention to the •
desired switching direction and also that all
unused inputs remain "free" or are again reset to
"free". This is necessary to ensure that inadvertent
actuations of these unused controls cannot cause
malfunctions.
The travel setting described below allows the
•
appropriate end state to be established for an
assigned switch.
Column 4, "Offset"
The control center for the given control, i.e. its zero
point, can be changed in this column. The adjustment
range lies between -125 % and +125 %.
0% +100% I5
I6
I7
I8
TYP
+100% 0.0 0.0
– –time+
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
GL
GL
GL
fr
fr
fr
---
---
---
Offset
GL
Nor mal
7 8
A simultaneous tap on the
cd
or
ef
keys of the
right touch pad ( CLEAR ) will reset the entry fi eld
value displayed in inverse video back to "0 %".
Column 5, "– "
This column is used to set servo travel symmetrically
or asymmetrically for each side. The setting range is
±125 % of normal servo travel.
Select an input, 5 through 16, with the
cd
selection
keys of the left or right touch pad.
To set
symmetric travel, i.e. control-side independent
travel, the respective operating element (transmitter
control or switch) is to be put into a position in which
the travel setting will be covered on both sides by the
marker frame.
0% +100% E5
E6
E7
E8
Typ
+100% 0.0 0.0
– Weg + –Zeit+
0%
+100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
GL
GL
GL
fr
fr
fr
---
---
---
Offset
GL
Nor mal
7 8
To set asymmetric travel, the respective operating
element (transmitter control or switch) is to be moved
to the side to be set such that the marker frame only
includes the value to be changed.
0% +100% I5
I6
I7
I8
TYP
+100% 0.0 0.0
– –time+
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
GL
GL
GL
fr
fr
fr
---
---
---
Offset
GL
Nor mal
7 8
The value setting is activated by briefl y touching the
center
SET key of the right touch pad. The value
fi eld/s will be displayed in inverse video. Values can be
changed with the selection keys of the right touch pad.
0% +111% I5
I6
I7
I8
TYP
+111% 0.0 0.0
– –time+
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
0% +100% +100% 0.0 0.0
GL
GL
GL
fr
fr
fr
---
---
---
Offset
GL
Nor mal
7 8