GRAUPNER 32032, Руководство по программированию, Страница: 72 / 324

72 Detail program description - Copy / Erase
pad then confi rmed with a tap on the SET key, or the
process can be canceled with a tap on the ESC key.
A memory location which is already occupied can be
overwritten.
03
04
01 01:23hR16
Ultimate 02
Graubele 1234g/080811
00:44hR12
Starlet
BELL47G
00:33hR08
00:22hR08
Test
trim needed
Impor t to model:
¿¿¿
free
¿¿¿
05
After confi rming the selected model memory with a tap
on the
SET key, a confi rmation request will appear:
model
Extra 300
impor t?
NO YES
05 ¿¿¿ free ¿¿¿
A NO response will cancel the process and return
the screen to the originating screen. If the
f
YES
response is selected and confi rmed with a tap on
the
SET key then the selected source model will be
imported into the selected destination model memory.
Notes:
If the message … •
SD-CARD
INSERT
OK
… appears instead of a screen for model
selection, there is no SD card in the transmitter's
Importing from SD card
Use the cd selection keys of the left or right touch
pad to select the »Import from SD« sub-menu then
tap on the
SET key.
Copy flight sen kopieren
Erase model
Copy modell –> Modell
Expor t to mnach SD-Kar te
Impor t from von SD-Kar te
=>
Œ
OFF ON
Please select
RF on/off?
If the message shown above should appear, the
transmitter's RF module is still active. Switch the RF
module off as described on page 80 then also, if a
receiver system is currently switched on, switch off that
receiver too. This is to be done for reasons of safety.
Select the model to be imported from the SD memory
card with the
cd selection keys of the left or right
touch pad.
03
04
01
11/06/06 06:06
Extra 300 02
Soar master
11/07/07 07:07
T-Rex 250
BellCobra
11/08/08 08:08
11/09/09 09:09
impor t from SD-CARD:
Note:
The export date posted at the right end of each model
name line is represented in the format "year/month/
day".
After another tap on the SET key of the right touch
pad, the "import from SD-CARD" window will appear.
Now the destination memory location can be selected
with the
cd
selection keys of the left or right touch
card slot, see page 23.
In addition to model data, binding data is also
•
imported by this process. This means that a
receiver system which was/is bound to the original
model memory can also be operated in the SAME
transmitter by its copy without establishing the
bond again.
Copy fl ight phase
Select the »Copy fl ight phase« sub-menu with the
cd
selection keys of the left or right touch pad then
tap on the SET key.
Copy flight phase
Erase model
Copy model –> model
Expor t to SD
Impor t from SD
=>
Œ
In the "Copy fl ight phase" sub-menu …
7
Copy from phase:
3
5
=>
=>
2
4
6
1
8
… the fl ight phase to be copied (1 … 8 for fi xed-wing
models or 1 … 7 for helicopter models) is selected
with the selection keys of the left or right touch pad
then confi rmed with a brief tap on the
SET key of the
right touch pad. In the next window to appear …