Appendix G - Communications Gateway Module Installation Kit
3A2797ZAA
103
Run Screens Available Data.
The HFR/ NVH system software version 1.13.009 or
later has two run screens that provide the data between
the HFR or NVH system, and the controlling PLC or
Robot logic. The screens are available if the HFR/ NVH
system detects the presence of a CGM module with the
correct map ID.
Run Screen 1
The first run screen (to the left of the main home screen)
provides graphical representations of the data provided
to the controlling logic. The bit data below is on (high)
when the circle graphic is green, and off (low) when the
graphic is Grey. See
Run Screen 2
The second run screen, the Fieldbus commands screen
provides graphical representations for the control data
requested from the PLC or robot to the HFR/ NVH logic.
The commands screen provides a green graphic when
a bit request is on (high), and a grey graphic when the
bit command is off or low. See F
. 43.
F
IG
. 42 New Fieldbus Data Indications Screen
F
IG
. 43 New Fieldbus Data Commands Screen
