Appendix C - ADM Run Screens Overview
3A2797ZAA
71
Home Screen, Standby Mode
In Standby Mode, the user can enable heating, park the
pumps, refill the tanks, circulate materials.
Press
to change operating modes.
Press
to move the pumps all the way to the left and
turns the hydraulic power pack off.
Press
or
to initiate a tank refill. If a tank is fill
-
ing, pressing either button will abort the filling opera
-
tion.
Press
to stop or start the hydraulic power pack and
run the start-up process.
Home Screen, Shot Mode
This mode allows the user to select one of 100 pre
-
on page 54
for information about editing shot definitions.
To use a predefined shot:
1. Enter shot mode.
2. Press
and use the numeric keypad to enter
the desired shot number.
3. Press
to select the shot number.
4. Press
to initiate a dispense. The system will go
to high pressure mode and dispense a shot after
on page 60, expires.
NOTE:
There is a three second delay after a dispense
before another dispense can be initiated.
5. Press
to switch between low and high pressure
modes without dispensing.
6. During a dispense, press
to abort the dispense.
7. See
on page 71 for
other button functions.
Target Flow
Ratio
Target recipe time
