Appendix B - ADM Setup Screens Overview
56
3A2797ZAA
5. Enter the calculated value in the ∆ column.
Shot Calibration Table
This screen allows the user to set the offset, ∆(g), for a
calculated range of shot sizes based on pump sizes
and material specific gravity.
NOTE:
This table is only available when defining the
shot by weight.
To enable the shot calibration table:
1. Navigate to
2. Press
then use the arrow keys to navigate to
the “Enable Range Calibration” option.
3. Press
to activate the option.
To edit a shot definition:
1. Navigate to
.
2. Press
to enter the screen.
3. Press
to show the shot calibration table.
4. Press
then use the arrow keys to navigate to
the desired value.
5. Type the new value then press
to accept the
new value.
6. Repeat as required for other ranges.
Example 3:
