Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 29 / 72

10/06/2008 M042.E GQ
• 29 ¥ 72
F 32 SCALE FACTOR
This function can be used for making “work pieces” with a scale factor ScF defined by the
operator. The following can be performed:
•
reduction scales 1 : 2.5 (ScF = 2.5) 1 : 4 (ScF = 4) etc...
•
enlargement scales 2 : 1 (ScF = 0.5) 4 : 1 (ScF = 0.25) etc...
•
% of increase (*) + 10% (ScF = 0.9) + 15% (ScF = 0.85) etc...
•
% of decrease (*) - 10% (ScF = 1.1) - 15% (ScF = 1.15) etc...
(*) For determining the percentage of shortening or lengthening.
The function can be entered and is active in both counting modes, ABS and INC. It is de-
activated (return to a scale of 1 : 1) every time the instrument is switched off, although the
scale does remain stored for quick reinstatement of the previous operating conditions.
If an OFFSET is required, it must be set after entering the scale factor. This will prevent
errors of interpretation (the OFFSET values entered earlier will be displaced by the same
scale factor).
To enter the function:
key
32
S c F no
® X
press To select
S c F yes
® X
press
the LCD will show the
current value, e.g.:
1. 0 0 0 0 0 0
® X
If we enter the reduction scale 1 : 2,5
key
2.5
1 2 3. 4 5
X
The function will be confirmed and the scale factor will be activated for all the Axes. Thus,
it is not possible to activate it separately for each single Axis.