Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 55 / 72

10/06/2008 M042.E GQ
• 55 ¥ 72
F 89 DEVICE DIAGNOSTIC
This function allows to verify that some parts are correctly working: scales, keyboard, axis
displays, axis leds, LCD display (optional).
To enable the function, proceed as follows:
Key
89
1 2 3. 4 5
X
1) Test for scales
This test allows to check the correct reading of the scales indicated by a blinking led on
the axis.
That check is allowed only on scales having reference marks at coded distance, at a
maximum moving speed of 6 m/min.
It is important to avoid performing any machining operation during the scale test,
since the exceeding maximum speed may result in displacement errors.
If a reading error is detected when moving (for instance due to some dirt), the following
message will be displayed on X axis (ex. error on Z axis):
F A u L t 3
X
The displayed number (1/2/3/4) corresponds to X,Y,Z and W axes respectively.
That message is displayed at any further passage on the error area.
2) Keyboard Test
press
The code related to the
button pressed will be
displayed
C o d E 000
® X
Press all the buttons in sequence; a code corresponds to each axis, according to the
following chart:
Button Code Button Code Button Code Button Code Button Code
sin 001 mr 110 + 308 rec 504 f6 702
cos 002 4 201 - 310 cor 508 z 704
tan 004 5 202 0 401 ↓ 510 y 708
sqr 008 6 204 . 402 F 601 x 710
% 010 * 208 +/- 404 ref 602 f5 801
7 101 / 210 exe abs 604 f4 802
8 102 1 301 ↑ 410 mm 608 f3 804
9 104 2 302 cal 501 1/2 610 f2 808
ms 108 3 304 sto 502 clr f1 810