Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 53 / 72

10/06/2008 M042.E GQ
• 53 ¥ 72
F 80 AXIS SPEED DISPLAYING
This function makes it possible to show, on the LCD display, the translation speed of the
Axis in motion.
To enable the function, proceed as follows:
Key
80
S P d no
® X
press To select
S P d yes
® X
press
To confirm the selection
1 2 3. 4 5
X
The LCD display will show the Axis translation speed expressed in m/min.
X 0.000 Y 0.000
Z 0.000 m/min
NOTES:
1. This function is available only in Vision LCD version.
2. It is possible to access the calculator or another function even when function
F 80 is activated. In this phase, the auxiliary display shows the function
which has been set. Just press the CLR
key to clear the function and show
the speed.
3. The function remains active even when the instrument is switched off.
4. If the function F 78 is selected, the LCD display will show the scaling factor
even when the function Axis speed has been activated.
5. Vision, in the 2-Axis model, does not include displaying of Z Axis.