Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 11 / 72

10/06/2008 M042.E GQ
• 11 ¥ 72
FUNCTION KEYS (CALCULATOR)
FUNCTION KEYS (CALCULATOR)
MEMORY KEYS (CALCULATOR)
®
FLASHING AXIS LED
˜
STEADY AXIS LED
The instrument provides a series of acoustic and visual signals to indicate the succession of
the settings. Every time a key is pressed, a “short” sound of a buzzer is heard, while
messages consisting of wordings or numbers appear on the display depending on the type
of setting made (see manual). Finally, the Axis LED underlines the activation of the axes
or that they have been set to perform (or to have performed) a given function. If the LED
flashes, the function is in progress, while if it is steadily lit (or if it extinguishes), the
function has been completed and performed.
In the event of incorrect entries, an acoustic alarm consisting of a “long” buzzer signal will
occur, accompanied by a visual alarm consisting of the following message:
E r r o r
This appears momentarily on the display in order to inform the operator that he has
pressed a key which is not compatible with the operation being carried out.
In the event of “overflow” errors, which occurs if measurements having a number of
digits greater than the counting capacity of the instrument are entered, the error is
indicated on the display as follows :
To exit from this type of situation, see
page 17
_ _ _ _ _ _ _ _
Some bad condition uses are shown by a numerical message
For example :
E r r o r 20