Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 27 / 72

10/06/2008 M042.E GQ
• 27 ¥ 72
To enable this function, proceed as follows:
Key
31
S E G.C. no
® X
press To select
S E G.C. yes
® X
press
The display proceed
to examine the next
axis, i.e.:
S E G.C. no
® Y
Complete the selection on every axis of the readout (X,Y,Z and W).
In order to program the initial point of each segment, proceed as follows:
press
During the selection of the
current axis, ex. X
1 2 3 . 4 5
® X
Place the axis in the initial
point of segments, “Point 0”
(ex. 500 mm).
5 0 0 . 0 0
® X
press The display will reset
Place the axis in the final point of the current segment, “Point 1”.
In our case, make a
displacement of 40 mm.
4 0 0 . 0 0
® X
Then enter the real measured value of displacement
In our case the real value is:
400.20 mm.
4 0 0 . 2 0
® X
press
The display will reset. Place
the axis in the final point of
the next segment.
5 0 . 0 0
® X
Then enter the real measured value of displacement, or press EXE to confirm the
displayed value.
In our case the displacement
corresponds to the displayed value
5 0 . 0 0
® X