Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 47 / 72

10/06/2008 M042.E GQ
• 47 ¥ 72
F 70 PROGRAMMING THE MEMORY BLOCKS
This function allows to store up to 1000 memory blocks, containing the positions of axis
(X,Y,Z), in
incremental counting mode. If repetitive operations have to be carried out, it
is possible to store a sequence of operations, with the purpose to recall it when needed.
Let us suppose the following machining operation has to be done:
Key
70
O r i G.
® X
The instrument highlights to move the carriages until the starting working point is reached.
The corresponding axes are bound when using that function, so that it is possible to
exclude those axes which are not involved in the operation, allowing them to be reset,
preset, etc.
ex. press
To exclude it
(led not blinking)
1 2 3. 4 5
Z
Move X and Y axes up to the starting point (ABS).
press
And enter the relevant
memory number (ex. 10)
S d M 1 0
® X
press
To access the storing of
memory blocks
0. 0 0
® X
X and Y axes are set in incremental counting mode and on the value
X =0.00 and Y= 0.00