Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 37 / 72

10/06/2008 M042.E GQ
• 37 ¥ 72
F 50 CALCULATING THE WEIGHTS OF MATERIALS
With this function it is possible to calculate the weight of a workpiece. To perform this
function, proceed as follows :
Key
50
SEL. MATERIAL
- ALUMINIUM
Press
to select the type
of material
SEL. MATERIAL
- STEEL
Continue to enter the data requested by the instrument. On completing the operations, the
display will indicate the weight of the material, expressed in kg.
SELECTABLE MATERIALS AND GEOMETRICAL SHAPES :
MATERIAL:
Aluminium, steel, brass, bronze.
GEOMETRICAL SHAPE: Round, square, hexagon, flat, round pipe, square pipe,
rectangular pipe.
NOTE: it is possible to set the specific weight of any material (including alloys) :
Key
50
SEL. MATERIAL
- ALUMINIUM
press
-WEIGHT MATERIAL
-NEW DENSITY
Introduce the specific weight (for example 3.2) and confirm by pressing
Key
3.2
GEOMETRICAL
SHAPE - ROUND
Proceed as described above until the weight of the piece is determined.
To store in memory the specific weight, use the
STO key, enter the number of program
(from 0 to 9) and confirm it by pressing EXE .
To re-call, for example, the programme number 4, press in sequence the following:
F 50 EXE REC 4 EXE .
To check the data contained in the program, use the COR key.
NOTE : This function is available only in Vision LCD version.