Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 52 / 72

10/06/2008 M042.E GQ
• 52 ¥ 72
F 74 SPECULAR IMAGE
This function can be used to reverse the sign of the co-ordinates of the: Constant Pitch,
Inclined Constant Pitch, Relay Triggering Dimension programs.
This function can only be carried out if these programs have been previously stored.
To perform this function:
Key
74
n o r
® X
press To select
S P E C
® X
Key
S P E C
X
That choice is confirmed and the instrument automatically switches to the following axis (the
corresponding LED blinks). Then proceed to confirm or to change for each axis. After the last
confirmation by EXE, the displays are again able to count.
F 78 SCALE VALUE SET
This function allows to display the scale value that has been set. Let us suppose that the
scale factor has been set using F 32 EXE, etc. To enable the function, proceed as follows:
Key
78
S c F no
® X
press To select
S c F yes
® X
press
To confirm the selection
1 2 3. 4 5
X
The LCD will display the percentage increment or decrement of the value which has been
set. For example, to reduce 1 : 2.5 the display will show:
SCALE VALUE
DEC. 150.0000 %
NOTES :
1. This function is available only in Vision LCD version.
2. It is possible to access the calculator or another function even when
function F 78 has been activated. In this phase, the auxiliary display
shows the function which has been set. Just press the CLR key to clear
the function and display the percentage scale factor.