Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 41 / 72

10/06/2008 M042.E GQ
• 41 ¥ 72
F 64 CIRCULAR FLANGE
This function can be used to make a series of holes arranged on a circumference.
Let us suppose, for example, that it is necessary to make 4 holes arranged on a
diameter of 100 mm.
Key
64
C E n t E r
® X
The instrument will indicate that the Carriages have to be moved until they reach the
centre of the circumference
Key
d i A M E t E r
® X
Enter a value of piece diameter. For example 100 mm.
Key
100
S t. A n G
® X
Enter a value of initial angle (degrees and hundredths of a degree). For example 0°.
Key
0
n r. P n t.
® X
Enter a value of numbers of holes. For example 4.
Key
4
- 5 0. 0 0
® X
0. 0 0
® Y
At this point, the program has been completed. To store it in memory location 0 (the
locations are numbered from 0 to 9) proceed as follows:
Key
0
F L G 0
® X
THE COUNTING DISPLAYS WILL INDICATE X -50,00 Y 0,00.
Follow the zero with the Carriages and drill the first hole. Proceed as above until the
workpiece has been finished. If it is not necessary to repeat the process on other
workpieces, press CRL. Otherwise, press EXE .
NOTE: To recall a previously set program, proceed as follows:
Key
64
F L G 0
® X
Key and
To check the data
of the program DIAMETER
100 mm
press
To start a machining operation