Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 44 / 72

10/06/2008 M042.E GQ
• 44 ¥ 72
F 68 INCLINED CONSTANT PITCH
This function can be used to drill a series of holes with a constant pitch arranged along an
axis that is inclined as compared to the X Axis (inclination is only possible as compared
to X and Y Axes). Let us suppose, for example, that a series of holes has to be drilled.
Key
68
O r i G.
® X
The instrument will indicate that the Carriages have to be moved until the starting point is
reached
Key pitch on the X Axis
S t E P
® X
Key
100
the X display
resets
0. 0 0
X
Key
A n G.
® X
Enter a value of inclined angle (degrees and hundredths of a degree). For example 45°.
Key
45
0. 0 0
® X
At this point the program has been completed. To store it in memory location 0 (the
locations are numbered from 0 to 9) proceed as follows:
Key
0
P r o G. 0
® X
NOTE: To recall a previously set program proceed as follows:
Key
68
P r o G. 0
® X
Key and
To check the data
of the program AXIS X
100.00 mm
press
To start a machining operation
press
To start the first hole
- C.P. INCLINED -
PITCH X: 1
à