Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 58 / 72

10/06/2008 M042.E GQ
• 58 ¥ 72
STO 100 TOOL OFFSETS
This function (only with an incremental count) is used for storing up to 100 tools (0-99).
The cutting position of each of them is associated with the rEF of the lines and is always
traceable after a power failure. Let us suppose that we have to produce the following
workpiece:
NOTE : To make explanation easier, let
us consider Y axis and two tools only.
Execute the rEF search as described on page 15. With tool
no. 4
skim or face the part
moving the truck along the Y Axis and reset it (or preset it).
Key
t o o L 0
X
Key
4
t o o L 4
X
and the value for tool
no. 4
is acquired. Change tool and skim the workpiece again.
Reset (or preset) the Y axis.
Key
5
t o o L 5
X
and the value for tool
no. 5
is acquired. Proceed in the same way for any other tool.
Execute the machining procedure, recalling the tools, i.e.:
Key
4
t o o L 4
X
Move the truck to position
0.00
and continue machining.
The OFFSETS can be recalled only if they have already been set. They are disabled to
prevent errors when the operator changes the scale factor, linear correction or a basic
configuration of the tool.