Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 49 / 72

10/06/2008 M042.E GQ
• 49 ¥ 72
When it is necessary to repeat a previously stored machining operation, place the
workpiece and recall the execution of the starting memory (no. 10 in our case):
Key
70
O r i G.
® X
The instrument highlights to move the carriages until the starting working point is reached
(ABS).
press
To exclude it
(led not blinking)
1 2 3. 4 5
Z
Move accurately X and Y axes to the starting point (ABS).
press
And enter the number of
memory to execute (ex. 10)
S d M 1 0
® X
press
To access the execution of
memory blocks
X and Y axes are set in
incremental counting mode and will display the value needed to
reach the first point (memory no. 10)
-
1 5. 0 0
® X
-
1 5. 0 0
® Y
Move X and Y axes up to the point X = 0.00 e Y = 0.00 (point 1) and drill the first hole.
press
To recall the position of X and
Y in memory no. 11
0. 0 0
® X
-
3 0. 0 0
® Y
Move X and Y axes up to the point X = 0.00 and Y = 0.00 (point 2) and drill the second
hole.
press
To recall the position of X and
Y in memory no. 12
-
5 0. 0 0
® X
0. 0 0
® Y