Givi Misure VISION 700, Инструкция по эксплуатации

Страница: 20 / 72

10/06/2008 M042.E GQ
• 20 ¥ 72
F 0 STORED DATA CLEARING
This function can be used to cancel the data entered by the operator, either globally or
selectively. The instrument has placed them in 11 different storage areas.
Key
0
and, if required
The indications concerning the types of data stored in the memory areas will be displayed,
together with the number corresponding to each area. If the keys indicated are pressed on
the keypad of the instrument:
1: All the data stored is cancelled. 8: Rotation speed is deleted
2:
The data concerning linear corrections
and scale factor corrections is cancelled
and these are reset to a value of 1 (that
is to say, no correction).
9:
10:
11:
Inclined constant pitch is deleted
Circular flange is deleted.
Special circular flange is deleted
3:
Both the absolute and the incremental
dimensions and references are cancelled.
4: The offsets are cancelled.
5: The origins are cancelled
6:
The weight of materials is cancelled.
7: The constant pitch is cancelled.
Every time one of the numbers indicated above is pressed, the function will be carried out,
while for the functions without a code it is necessary to enter EXE.