GILES FSH-4 Hood Скачать руководство пользователя страница 24

Страница: 24 / 68

Model: FSH-4 Hood

Installation

Giles

Ventless Hoods

must be protected by the

Ansul

R-102 Restaurant Fire Suppression System

in accordance

with the hood listing.

Procurement, field installation, set-up, charging, testing and certification of the system is

the responsibility of the customer

(NOT included with hood

). System must be provided and installed by an

authorized Ansul

Distributor/Dealer.

The hood includes factory-installed piping, plenum discharge nozzles,

detector link brackets, and cable conduit. Piping and conduit are stubbed on top of the hood, ready for connection

of the fire suppression system.

Appliance drop-downs and nozzles are not included

Appliance Nozzles -

Specified and supplied by Ansul installer based on appliance types.

Plenum Nozzles -

Ansul No. 56927 Plenum Nozzles

Detector Links -

Ansul No. 56811- 165ºF (74ºC).

Appliance nozzles shall be positioned 11" [279.4mm] below the lowermost front edge of the hood.

Both appliance nozzles must be installed.

A manual activation station for the fire system

(NOT included)

is to be installed and located in a path of

egress (exit). The pull station must be clearly marked and easily accessible.

The Regulated Release Assembly (Automan) with a 3-Gal suppressant tank shall be the mechanical type;

Ansul® Automan #79290

Installation, use, and maintenance of the

FSH Hood

must be in accordance with the

Standard for

Ventilation Control

Fire Protection of Commercial Cooking Operations, NFPA 96

Fire Extinguisher Piping

Connection

Fusible Link

Connection

Regulated Release

Assembly (Ansul P/N

79290)

Manual

Activation

Station

NOTE: System can be connected at side of the hood.

2.06

Fire Suppression System Installation

2.06.1 Fire Suppression System Connection

Содержание FSH-4 Hood





































































Результаты поиска

Содержание FSH-4 Hood

Отзывы:

Похожие инструкции для FSH-4 Hood

Бренды по названию

Популярные бренды

GILES FSH-4 Hood, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание FSH-4 Hood

Отзывы:

Похожие инструкции для FSH-4 Hood

Бренды по названию

Популярные бренды