GILES FSH-4 Hood Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 68

background image

42

Model: FSH-4 Hood

Hood Cleaning & Maintenance

5.03.1

Semi-Annual (6-Mo) Fire Suppression System Inspection & Maintenance

•     Confirm that the fire hazard potential has not changed.
•     Inspect suppressant storage tank for chemical level and charge pressure.
•     Inspect and test the Automan release mechanism.
•     Check all nozzles to ensure they are free of grease build-up.  Confirm that all nozzle blow-off caps are in place

and in good condition; replace as needed. See

Section 2.06.4, Fire Extinguisher Nozzle Locations

.

•     Inspect and test the remote manual activation station for function and wear.
•     Install test link and cut to test automatic actuation.
•     Inspect and clean detector fusible links.  Confirm that detector links are of the correct temperature rating.  See

Section 2.06.2, Fire Suppression Detector Links & Location

.

• Inspect conduit and wire cable for wear at pulleys and detectors; replace if necessary.
• Record maintenance date and service performed in a permanent file, and sign-off on tag attached to system in

a conspicuous location.

Service and inspection of the fire suppression system must be performed by a qualified

Ansul® Distributor/Dealer

. As a

minimum, field inspection of the fire suppression system must be conducted semi-annually (every 6 months) and shall

consist of the following:

Same as

Semi-Annual

except:

• All fusible detector links must be replaced with new. See

S

ection 2.06.2, Fire Suppression Detector Link

Specification

&

Location.

5.03.2

Annual (12-Mo) Fire Suppression System Inspection & Maintenance

Same as

Annual

except:

• Replace wet-chemical fire suppressant.
• Hydrostatic test and certify suppressant tank and compressed gas charging cartridge. As alternative,

components can be replaced with new.

• Flow test the regulator.

5.03.3

12-Year Fire Suppression System Inspection & Maintenance

«
...
50
51
52
53
54
...
»

Содержание FSH-4 Hood





































































Отзывы:

Нет отзывов

Похожие инструкции для FSH-4 Hood

Бренд: Panasonic Страницы: 174

Бренд: Federal Страницы: 43

Бренд: e+p Elektrik Handels Страницы: 2

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 13

Бренд: PA Страницы: 28

Бренд: Landoll Страницы: 144

Бренд: Castellini Страницы: 299

Бренд: Lowenstein Medical Страницы: 457

GrainLogix XLB10

Бренд: LOFTNESS Страницы: 104

INTRA PROPHYwiz 181 P

Бренд: KaVo Страницы: 22

Бренд: Festo Страницы: 40

Бренд: Neurotech Страницы: 24

MACDON C HARVESTEC 6000

Бренд: CORN Страницы: 24

Бренд: Star Страницы: 16

Бренд: Protech Machinery Страницы: 21

Бренд: TOORX Страницы: 28

Blue Bullet 1302-BAS

Бренд: BendPak Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды