GILES FSH-4 Hood Скачать руководство пользователя страница 44

Страница: 44 / 68

Model: FSH-4 Hood

Operation & Filter Maintenance

If a

baffle filter, pre-filter, or charcoal filter

is not in place, or not positioned correctly, the red

[CHARCOAL OR

BAFFLE FILTER MISSING]

light will turn

ON.

ower to appliances under hood is turned

OFF

until the condition is

corrected; the amber

[APPLIANCE POWERED]

light turns

OFF

. No

audible alarm will sound.

• Hood fan continues running.

• Confirm that all Filters are in place.

See

Sections 4.02.3

•

4.02.5

•

4.02.9, Filter Installation.

• Remove and reinstall Filters to ensure they are seated properly

in guides and are pushed fully into the filter compartment so

that doors will properly close. Each filter must also actuate a

proofing switch located in the filter channels (charcoal & pre-

filter switches are in the top of the compartment; baffle filter switches are located in the filter rack underneath

hood).

4.03

Hood Filter Alarms

4.03.1

Baffle, Pre-Filter or Charcoal Filter Missing

baffle filters

pre-filters

, or

charcoal filters

become clogged, or other conditions occur that obstruct airflow

through the Hood such that it falls below the minimum required to provide effective capture of cooking vapors, the

[CHARCOAL OR BAFFLE FILTER CLOGGED]

light will turn

ower

to all appliances under hood is turned

OFF

until the condition is

corrected and the amber

[APPLIANCE POWERED]

light turns

OFF

A steady (constant) tone audible alarm will begin sounding.

• Hood fan continues running.

• Clean the baffle filter

(

Section

4.04.1, Baffle Filter Cleaning)

• Replace pre-filters or charcoal filters with fresh new filters

(Section 4.03.4, Pre-Filter Maintenance

•

Section 4.03.5,

Charcoal Filter Maintenance)

• Inspect Hood plenum to ensure that no other obstructions are present.

• Check the Hood exhaust outlet and be sure that nothing is obstructing it or the surrounding area.

4.03.2

Baffle, Pre-Filter or Charcoal Filter Clogged

Содержание FSH-4 Hood





































































Результаты поиска

Содержание FSH-4 Hood

Отзывы:

Похожие инструкции для FSH-4 Hood

Бренды по названию

Популярные бренды

GILES FSH-4 Hood, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание FSH-4 Hood

Отзывы:

Похожие инструкции для FSH-4 Hood

Бренды по названию

Популярные бренды