GEZE TSA 160 NT F, Схема подключения

Страница: 53 / 64

TSA 160 NT
53
Display programme switch DPS and Service push buttons S1, S2
24 Display programme switch DPS and Service push buttons S1, S2
24.1 Display programme switch (DPS)
The DPS can be used for commissioning and servicing, mat. no. 151524:
à
for changing the drive parameters
à
for teaching the drive
à for diagnosis
Mode of operation Service mode
N a Night mode × Cancel and return to first
menu level
OFF
1
2
3
4
ls Exit only  Confirm
a U Automatic

Scroll up
increase value
D O Hold open

Scroll down
Reduce value
O f OFF
 + 
simultaneously
Change
2-leaf operation
1-leaf operation
– –
Service button (1)
+

simultaneously
Change operating mode / service mode
1 Service button
2 Position unknown
3 Illuminated for maintenance
4 Lights up at 1-leaf operation
24.2 Service buttons S1 and S2
1 Service button S1
2 Service-LEDs
3 Service button S2
The service push buttons S1 and S2 as well as the service LEDs have the following functions:
à
Opening and changing drive parameters
à
Querying diagnosis data (states, values, faults)
During normal operation the LEDs indicate the current mode of operation.
The mode of operation can be changed using keys S1 and S2.
Function Input and reaction
Open/exit the parameter menu
X
Simultaneously press buttons S1 and S2 longer than 2 s.
LED5 flashes slowly, corresponding to the selected parameter
level:
Level 1: 1 pulse + 1 s pause
Level 2: 2 1 s pause
LED1 through LED4 display the parameter.
Select the parameter
X
Briefly press button S2 (+) or button S1 (–).
Switch to value setting
X
Hold down push button S1 longer than 2 sec.
In the value menu, LED5 is off and LED1 through LED4
display the value in accordance with the value table.
Change value
X
Briefly press button S2 (+) or button S1 (–).
Confirm value
X
Press button S1 longer than 2 s.
Value setting without exiting value change
X
Press button S2 longer than 2 s.
Reset the values to the factory settings
X
Set parameter 24 (factory settings) to
01
.