Gerber ODYSSEY XP, Руководство пользователя

Страница: 38 / 84

32 CHAPTER 4
Tool Settings
4 Press F3 and F4 to toggle back and forth between Use Rules
: When
Received
or
Never
.
5
Press ENTER when the display shows Never. The ODYSSEY XP
ignores the rules sent by OMEGA or GA and instead uses the settings
of the current material selected at the plotter.
6
Optional . Instead of step 5, you can clear the Use Settings check box in
the Plotter Settings dialog box in GAPlot32/GSPPlot.
Choosing the material
Material can be chosen in Gerber software at the time of job design or in
the plot program. Refer to the Reference manual when making a material
choice in the software. Material choice can also be set or changed at the
plotter using the control panel.
To choose the material at the control panel
1
In the Main Menu, press F3 (Settings) to open the Settings menu.
2
If the material shown is what you are using, press ENTER to return to
the Main Menu.
3
If it is not the correct material, press F3, Material to go to the Select
Material Type screen.
4
Use F3 or F4 to scroll up or down through the list of materials.
5
When the material type you are using appears, press ENTER. At any
time, you can press CANCEL to exit without saving the change.
SETTINGS MENU
(Default) Material
Corners Force
* ScotchCal220 *
F3
SELECT MATERIAL TYPE
+
* ScotchCal220 * -
ENTER Key to Accept
F3
F4
SELECT RULE USAGE
Use Rules: +
When Received -
ENTER Key to Accept
F3
F4