Gerber ODYSSEY XP, Руководство пользователя

Страница: 27 / 84

21
If one job is loaded CANCEL key clears the job from
plotter memory.
If several jobs are
loaded CANCEL clears one job at a time,
starting with the first one received.
If a job is running CANCEL stops all plotter motion,
ends the job, and clears it from
plotter memory.
If you start to change a
setting when a job is
running or in the
buffer, and have not
yet accepted the
changes by pressing
ENTER CANCEL discards the changes and
returns the previous menu.
To end a job, you must press
CANCEL again.
Slew Key
Left
Right
Up
Down
Movement
Carriage to the left
Carriage to the right
Material backward (toward the
back and out of the plotter)
Material forward (toward the
front and through the plotter)
Use the slew keys to move the carriage and material.
Slew speed starts slowly and increases as you continue to
hold down the key.
Quickly pressing and releasing a slew key produces
movements in increments of 0.001 inch.
To move the carriage and material at the same time, slew
diagonally.
Simultaneously press the two slew keys next to the arrow
that points in the direction you want to move.