GEDA 14830, Сборка и руководство по эксплуатации

Страница: 29 / 92

Rack and pinion hoist
Assembly and Operating Manual 29 / 92 BL054 GB Edition 08.2015
4.3 Equipment as accessories
4.3.1 Electric module for landinglevel safety door
The electric module must be installed on the landing level equipment
when local regulations specify electrical monitoring of the landing-level
sliding door or control of an upper stop is required.

Control from the stop is only possible in operating mode
“Operation” (external control) and only above the initial 2 m safety
height.
Additional equipment:
Extension cable 20 m
Assembly

Comprehensive instructions for
assembly are only described in
the assembly manual of the
landing level equipment.
• Install the electric module on the
sliding door mounting of the
landing level equipment and
attach with the wing nut (4).
• The supply line (2) [7-pole plug, red] from the first electric module is
connected to the ground-station switch box.
−
If there are several landings with electric modules, the supply line (2)
[7-pole plug, red] from the second landing is connected to the socket
(1) of the electric module below.

The dummy plug is always changed over from the ground-station
switch box to the top electric module.
1
2
3
4