GEDA 14830, Сборка и руководство по эксплуатации

Страница: 57 / 92

Rack and pinion hoist
Assembly and Operating Manual 57 / 92 BL054 GB Edition 08.2015
7 Operation
The GEDA 500 Z may only be operated by a qualified person
appointed by the operating company. This person must be familiar
with the operating manual, have sufficient experience and be
informed about the risks involved in handling the hoisting
equipment.
Operating personnel see section 1.6.2
7.1 Safety during operation
• Also observe the safety notes in Chapter 2.4.
• Transporting persons is prohibited!
−
It is permitted to ride on the platform to
carry out assembly and maintenance work.
• Operation must be from outside the danger area.
• The operator must always be able to monitor the platform.
• Particular care is required near ground level.
• Load the platform as centrally as possible, observe the load capacity
of the equipment.
−
The platform must always be loaded in such a way that the platform
access points are kept clear.
−
Position the load carefully on the platform; material that might tend to
slip or is higher than the platform, or which could fall over, must be
secured (consider the possibility of sudden winds).
−
Do not transport bulky parts that project over the side of the platform.
• Do not stand or work under the platform!
• Do not place objects underneath the platform.
−
Store material at a safety distance of min. 50 cm from moving parts
of the machine.
• Landing-level safety doors may only be unlocked and opened when
the load platform is turned and when using the key secured to the
gate.
• If the loaded platform stops due to a malfunction during operation,
the operator must recover the load. - Never leave a loaded platform
unattended!
• Load platform operation must cease if:
−
Wind speeds are over 72 km/h (20 m/sec. ≈ Wind force is 7-8
according to the Beaufort scale).
−
the temperature is less than -20 °C.
−
there is damage or other malfunctions.
−
If a recurring inspection has been missed (refer to Chapter 3).