GEDA 14830, Сборка и руководство по эксплуатации

Страница: 10 / 92

Rack and pinion hoist
Assembly and Operating Manual 10 / 92 BL054 GB Edition 08.2015
1.6 Intended use
The
GEDA 500 Z
rack and pinion hoist is a construction hoist that is
temporarily erected and
• which is intended exclusively for putting up scaffolding and as
additional equipment (landing-level safety doors) for transporting
items and materials during construction work.
• which may only be operated after the landing-level safety doors are
installed at each transfer point to the building or scaffolding.
• which may only be operated at a wind speed of up to 72 km/s
(20 m/sec. ≈ wind force 7-8 according to the Beaufort scale).
−
which must have its platform parked on the ground and taken out of
operation at higher wind speeds.
• which may only be operated from outside the cordoned-off and
signposted hazard area using the ground control and / or operated
from the landing level control above the 2 m safety height.
Observe and comply with the instructions in Chapter 4.3.4, “Technical
specifications”.
Any other use or any use going beyond this is not considered proper
use.
The operating company/user of the machine is solely liable for any
damage resulting from such action. This applies equally to any arbitrary
changes to the machine.
Intended use includes
−
That the assembly, operation and maintenance provisions (assembly
and operating manual) provided by the manufacturer are complied
with.
−
That the foreseeable misconduct of other persons is taken into
consideration.
−
That the corresponding national regulations are complied with.

The GEDA 500 Z is suitable for temporary use on construction
sites. Any other locations or intended uses require written
approval from the manufacturer.