GEDA 14830, Сборка и руководство по эксплуатации

Страница: 19 / 92

Rack and pinion hoist
Assembly and Operating Manual 19 / 92 BL054 GB Edition 08.2015
3 Tests
The GEDA 500 Z is a machine in compliance with the EC machinery
directive 2006/42/EC. A copy of the conformity declaration is
reproduced in this operating manual.

Inspections before commissioning, recurring inspections and
intermediate inspections must be carried out according to national
regulations.
During the checks, the condition, presence and function of all safety-
related features of the machine are checked using appropriate
procedures. Appropriate procedures are:
• Visual inspections
• Function and efficacy checks
• Checks using measurement and test equipment
For each test, the scope of the test, type of test and the execution of the
test by competent persons must be defined by the operating company.
Type of test Inspection procedures
Check by a trained person Basic visual inspection and function check
with few test steps and simple evaluation
Check by a competent person Check due to special events / damage, e.g.
−
Assembly
−
Maintenance
−
Natural phenomena
Checking by an accredited
inspection body (technical specialist)
Recurring check for systems / machines that
must be monitored.
Checking in accordance with national
regulations
3.1 Documenting the results
The operating company must document the results of the checks. The
documentation must be kept for a reasonable period of time – however
at least for the entire lifetime of the machine.
• The results of the recurring check can be recorded in writing in the
appendix of this manual.
• Verification of the execution of the last check must be attached to the
machine.