Rack and pinion hoist
Assembly and Operating Manual
30 / 92
BL054 GB Edition 08.2015
4.3.2
Standard push-on frame for the load platform
1 = Standard push-on frame for safe
Tools required:
2 ring or open-jaw spanners - width across
flats 13/17
1 screwdriver
Assembly
−
Remove the plastic cap from the
corner strut (2).
−
Remove the screws from the transverse joints and place the push-on
frame (1) into this corner strut (2) and attach together using the
previously removed screws.
−
Use the hexagon-
headed screw M
8 x 55, washer
and nut supplied
to the push-on
frame (1) at the
top of the corner
strut.
−
Secure the chain (4) to the left-hand corner strut (5) using screw M 8
x 55 into the borehole provided
∅
9 (place large washer under the
hex screw).
1
5
4
3
1
2
2
Содержание 14830
