GEDA 14830 Скачать руководство пользователя

Страница: 11 / 92

Rack and pinion hoist

Assembly and Operating Manual

11 / 92

BL054 GB Edition 08.2015

1.6.1

Requirements of assembly personnel

The machine may only be assembled, operated and maintained by

qualified persons who, based on their training, knowledge and practical

experience, can guarantee proper handling and who are aware of the

risks associated with the construction hoist. These persons must be

appointed to the tasks of installation, dismantling and maintenance by

the operating company.

1.6.2

Operating personnel

The machine may be operated only by persons who, based on their

training, knowledge and practical experience, can guarantee proper

handling.

These persons must

−

have been appointed by the operating company.

−

have been appropriately instructed and informed about the risks.

−

be familiar with the assembly and operating manual.

−

observe national regulations

1.6.3

Improper use

•

Transporting persons is prohibited!

−

Only authorised persons are permitted to ride the platform, and only

for the purposes of assembly and servicing work. Special measures

are required for such operations.

−

Use the front fall protection.

−

Operation during assembly work may only be carried out using the

assembly control from the load platform.

•

The

500 Z

is not designed for permanent installation.

•

The

500 Z

must not be constructed to be free-standing (without

anchors).

•

Persons without instruction on the machine, who are not familiar with

the operating instructions or children must not operate it.

Consequences of improper use of equipment

−

Danger to life and limb of the user or a third party.

−

Damage to the machine and other tangible assets.

Содержание 14830





























































































Результаты поиска

Содержание 14830

Отзывы:

Похожие инструкции для 14830

Бренды по названию

Популярные бренды

GEDA 14830, Сборка и руководство по эксплуатации

Результаты поиска

Содержание 14830

Отзывы:

Похожие инструкции для 14830

Бренды по названию

Популярные бренды