GEDA 14830, Сборка и руководство по эксплуатации

Страница: 48 / 92

Rack and pinion hoist
Assembly and Operating Manual 48 / 92 BL054 GB Edition 08.2015
Inspection before mast assembly
Raise the empty load platform (manual control) and check if
−
the proximity shuts down the unit at the end of the mast.
−
the last (on the gear rack side) eye bolt of the hook has been
activated on the gear wheel guard.

The ramp must be closed and the assembly guard plate must be
up and secured.
Before the platform ascends, ensure that the base unit is standing
securely. During travel, do not lean out over the side walls of the
platform.
• Press the button UP (3) [assembly control]
and ascend in the load platform until the
proximity switch stops the hoist.
Then release UP button (3).
• Slightly raise the assembly guard
plate (5), pull forwards and lower.
3
5