manualshive.com logo in svg

GE L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

5-73

5

RxGOOSE1 ETYPE APPID

Range: 0 to 65535 in steps of 1
Default: 0

If the value entered is non-zero, the APPID field of incoming GOOSE messages must exactly match this value for the 
message to be accepted as a valid RxGOOSE1 message. If the value entered is zero, RxGOOSE1 does not check the value 
received in the APPID field.
If the publisher is a UR series 7.3x device, the setting needs to match the value of the publisher’s 

TxGOOSE ETYPE APPID

 

setting.

RxGOOSE1 GoCBRef

Range: 0 to 129 alphanumeric, underscore, slash and period characters, beginning with an alpha character
Default: empty string

The gocbRef field of incoming GOOSE messages must match this value for the message to be accepted as a valid 
RxGOOSE1 message. If the entered value is the empty string, RxGOOSE1 is disabled. If not the empty string, the entry 
needs to be an ACSI ObjectReference to the publishing control block in the format:
<LDName>/LLN0.<GoCBName>
where <LDName> is the function-related name if the logical device containing the publishing control block has "ldName" 
configured, otherwise the product-related name of that logical device, and <GoCBName> is the name of the publishing 
control block.
The L60 translates the ACSI format required for this setting to the MMS format used in GOOSE messages:
<LDName>/LLN0$GO$<GoCBName>
If the publisher is a UR 7.3x or 7.40 series device, <LDName> is the value of the publisher's Master functional ldName 
setting if that setting is not empty, otherwise it is the value of the publisher's IED NAME suffixed with "Master". If the 
publisher is a UR 7.3x series device, <GoCBName> is "GoCB" suffixed with the two digit TxGOOSE instance number, for 
example "GoCB01". If the publisher is a UR 7.40 series device, <GoCBName> is as specified earlier in the TxGOOSE 
section of this chapter.

RxGOOSE1 datSet

Range: 0 to 32 alphanumeric and underscore characters, beginning with an alpha character
Default: empty string

If the entered value has one or more characters, the datSet field of incoming GOOSE messages must exactly match this 
value prefixed by <LDName>/LLN0$ for the message to be accepted as a valid RxGOOSE1 message. <LDName> is as 
specified in the RxGOOSE GoCBRef setting above. If the entered value is the empty string, RxGOOSE1 does not check the 
value received in the datSet field.
If the publisher is a UR 7.3x series device, set this setting to the value of the publisher's DataSetxx name setting, where xx 
is the instance number of the data set selected by the publisher's 

TxGOOSE datSet

 setting. If the publisher is a UR 7.40 

series device, datSet is as specified in the DataSets section of this chapter.

RxGOOSE1 ConfRev

Range: 0 to 4294967295 in steps of 1
Default: 1

If the value entered is non-zero, the confRev field of incoming GOOSE messages must exactly match this value for the 
message to be accepted as a valid RxGOOSE1 message. If the entered value is zero, RxGOOSE1 does not check the value 
received in the confRev field.
If the publisher is a UR 7.3x series device, set this setting to match the value of the publisher's 

TxGOOSE ConfRev

 setting.

R-RxGOOSE1 RECEPTION MODE

Range: SSM, ASM, Unicast
Default: SSM

When the 

RxGOOSE1 MODE

 setting is other than R-GOOSE the value of this setting is not used. Otherwise it selects the 

R-GOOSE reception mode.

Содержание L60

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

Samson 3296 Mounting And Operating Instructions preview
3296
Бренд: Samson Страницы: 100
Radio Shack Remote Control Owner'S Manual preview
Remote Control
Бренд: Radio Shack Страницы: 3
Panasonic TY-RM50VW Operating Instruction preview
TY-RM50VW
Бренд: Panasonic Страницы: 72
Panasonic CZ-RTC5 Operating Instructions Manual preview
CZ-RTC5
Бренд: Panasonic Страницы: 45
Panasonic CZ-RWSU3 Operating Instructions Manual preview
CZ-RWSU3
Бренд: Panasonic Страницы: 24
Fantech ECO-TOUCH Operating Manual preview
ECO-TOUCH
Бренд: Fantech Страницы: 2
Lawler 805 Installation & Maintenance Manual preview
805
Бренд: Lawler Страницы: 5
Jabra LINK 280 - User Manual preview
LINK 280 -
Бренд: Jabra Страницы: 8
YUGE LCC Series Hardware Manual preview
LCC Series
Бренд: YUGE Страницы: 69
Quectel EC25 series Command Manual preview
EC25 series
Бренд: Quectel Страницы: 232
Quectel L76 Reference Design preview
L76
Бренд: Quectel Страницы: 9
Quectel BC26 Manual preview
BC26
Бренд: Quectel Страницы: 73
Vanderbilt SPCN310 Installation Instruction preview
SPCN310
Бренд: Vanderbilt Страницы: 2
YASKAWA CIMR-ZU Series Programming Manual preview
CIMR-ZU Series
Бренд: YASKAWA Страницы: 340
KIPI ecoMAX360P1-C Installation And Operating Manual preview
ecoMAX360P1-C
Бренд: KIPI Страницы: 44
Gallagher 086511 Quick Start Manual preview
086511
Бренд: Gallagher Страницы: 2
Woodward ProAct III Installation And Operation Manual preview
ProAct III
Бренд: Woodward Страницы: 32
Nibe F1255 Series User Manual preview
F1255 Series
Бренд: Nibe Страницы: 92

Бренды по названию

Популярные бренды

Загрузить еще бренды