manualshive.com logo in svg

GE L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

5-121

5

When enabled, the LED test can be initiated from any digital input or user-programmable condition, such as a user-
programmable pushbutton. The control operand is configured under the 

LED TEST CONTROL

 setting. The test covers all 

LEDs, including the LEDs of the optional user-programmable pushbuttons.
For the enhanced and standard front panels, the test consists of the following three stages:
1.

All 62 LEDs on the relay are illuminated. This is a quick test to verify if any of the LEDs is “burned.” This stage lasts as 
long as the control input is on, up to a maximum of one minute. After one minute, the test ends.

2.

All the LEDs are turned off, and then one LED at a time turns on for one second, then back off. The test routine starts at 
the top left panel, moving from the top to bottom of each LED column. This test checks for hardware failures that lead 
to more than one LED being turned on from a single logic point. This stage can be interrupted at any time.

3.

All the LEDs are turned on. One LED at a time turns off for one second, then back on. The test routine starts at the top 
left panel moving from top to bottom of each column of the LEDs. This test checks for hardware failures that lead to 
more than one LED being turned off from a single logic point. This stage can be interrupted at any time.

For the graphical front panel, the test consists of the following stages:
1.

All 22 LEDs on the relay are illuminated. This is a quick test to verify if any of the LEDs is "burned." This stage lasts as 
long as the control input is on, up to a maximum of one minute. After one minute, the test ends.

2.

All the LEDs are turned off, and then one LED at a time turns on with the orange color for one second, then back off. 
The test routine starts at the top left panel, moving from the top to bottom for all 14 LEDs. Then the eight pushbutton 
LEDs are tested in the same manner. This test checks for hardware failures that lead to more than one LED being 
turned on from a single logic point. This stage can be interrupted at any time.

3.

All the LEDs are turned on with the orange color. One LED at a time turns off for one second, then back on. The test 
routine starts at the top left panel moving from top to bottom for all 14 LEDs. Then the eight pushbutton LEDs are 
tested in the same manner. This test checks for hardware failures that lead to more than one LED being turned off 
from a single logic point. This stage can be interrupted at any time.

4.

Additionally, stages 2 and 3 are repeated twice for the five device status LEDs and nine event cause LEDs, one time 
with green color on and the other with red color on.

When testing is in progress, the LEDs are controlled by the test sequence, rather than the protection, control, and 
monitoring features. However, the LED control mechanism accepts all the changes to LED states generated by the relay 
and stores the actual LED states (on or off) in memory. When the test completes, the LEDs reflect the actual state resulting 
from relay response during testing. The reset pushbutton does not clear any targets when the LED Test is in progress.
A dedicated FlexLogic operand, 

LED TEST IN PROGRESS

, is set for the duration of the test. When the test sequence is initiated, 

the LED TEST INITIATED event is stored in the event recorder.
The entire test procedure is user-controlled. In particular, stage 1 can last as long as necessary, and stages 2 and 3 can be 
interrupted. The test responds to the position and rising edges of the control input defined by the 

LED TEST CONTROL

 

setting. The control pulses must last at least 250 ms to take effect. The following diagram explains how the test is 
executed.

Содержание L60

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

NCR 1651 Quick Reference Manual preview
1651
Бренд: NCR Страницы: 6
Panasonic FP0 Series Specifications preview
FP0 Series
Бренд: Panasonic Страницы: 27
Panasonic CZ-64ESMC2 Instruction Manual preview
CZ-64ESMC2
Бренд: Panasonic Страницы: 78
Panasonic GM1 Series Reference Manual preview
GM1 Series
Бренд: Panasonic Страницы: 98
NAiS FP0 Series Hardware Manual preview
FP0 Series
Бренд: NAiS Страницы: 173
Panasonic SL-VGU1-EC Instruction Manual preview
SL-VGU1-EC
Бренд: Panasonic Страницы: 2
GBD F4 Instructions For Installation Manual preview
F4
Бренд: GBD Страницы: 15
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Бренд: Madas Страницы: 6
Madas EVP/NC Manual preview
EVP/NC
Бренд: Madas Страницы: 11
National Instruments NI 9215 Calibration Procedure preview
NI 9215
Бренд: National Instruments Страницы: 8
ZIMMERLI MESSTECHNIK LPS Series Operating Manual preview
LPS Series
Бренд: ZIMMERLI MESSTECHNIK Страницы: 12
GEA VESTA Operating Instructions Manual preview
VESTA
Бренд: GEA Страницы: 47
National Instruments NI 9514 User Manual preview
NI 9514
Бренд: National Instruments Страницы: 72
National Instruments NI 9514 Operating Instructions And Specifications preview
NI 9514
Бренд: National Instruments Страницы: 41
NAPCO MAGNUM ALERT 3000 FIRE ALARM Basic Operating Instructions preview
MAGNUM ALERT 3000 FIRE ALARM
Бренд: NAPCO Страницы: 2
cinetto PS40.3 Assembly Instructions Manual preview
PS40.3
Бренд: cinetto Страницы: 56
D&R ELECTRONICS RDS17S-ELITE1-R1 Installation Manual preview
RDS17S-ELITE1-R1
Бренд: D&R ELECTRONICS Страницы: 12
jedi LIGHTING iDual A E27 iD60 Manual preview
iDual A E27 iD60
Бренд: jedi LIGHTING Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды