manualshive.com logo in svg

GE L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

5-55

5

The DNP scale factor settings are numbers used to scale analog input point values. These settings group the L60 analog 
input data into the following types: current, voltage, power, energy, power factor, and other. Each setting represents the 
scale factor for all analog input points of that type. For example, if the 

DNP VOLTAGE SCALE FACTOR

 setting is set to “1000,” 

all DNP analog input points that are voltages are returned with values 1000 times smaller (for example, a value of 72000 V 
on the L60 is returned as 72). These settings are useful when analog input values must be adjusted to fit within certain 
ranges in DNP masters. Note that a scale factor of 0.1 is equivalent to a multiplier of 10 (that is, the value is 10 times larger).
The 

DNP DEFAULT DEADBAND

 settings determine when to trigger unsolicited responses containing analog input data. These 

settings group the L60 analog input data into the following types: current, voltage, power, energy, power factor, and other. 
Each setting represents the default deadband value for all analog input points of that type. For example, to trigger 
unsolicited responses from the L60 when any current values change by 15 A, the 

DNP CURRENT DEFAULT DEADBAND

 setting 

is set to “15.” Note that these settings are the deadband default values. DNP object 34 points can be used to change 
deadband values, from the default, for each individual DNP analog input point. For any change to take effect, restart the 
relay. Whenever power is removed and re-applied to the L60, the default deadbands are in effect.

The 

DNP TIME SYNC IIN PERIOD

 setting determines how often the Need Time Internal Indication (IIN) bit is set by the L60. 

Changing this time allows the DNP master to send time synchronization commands more or less often, as required.
The 

DNP MESSAGE FRAGMENT SIZE

 setting determines the size, in bytes, at which message fragmentation occurs. Large 

fragment sizes allow for more efficient throughput; smaller fragment sizes cause more application layer confirmations to 
be necessary, which provides more robust data transfer over noisy communication channels.

The 

DNP OBJECT 1 DEFAULT VARIATION

 to 

DNP OBJECT 32 DEFAULT VARIATION

 settings select the DNP default variation 

number for object types 1, 2, 20, 21, 22, 23, 30, and 32. The default variation refers to the variation response when variation 
0 is requested and/or in class 0, 1, 2, or 3 scans. See the DNP Implementation section in the UR Family Communications 
Guide.
The DNP binary outputs typically map one-to-one to IED data points. That is, each DNP binary output controls a single 
physical or virtual control point in an IED. In the L60 relay, DNP binary outputs are mapped to virtual inputs. However, some 
legacy DNP implementations use a mapping of one DNP binary output to two physical or virtual control points to support 
the concept of trip/close (for circuit breakers) or raise/lower (for tap changers) using a single control point. That is, the DNP 
master can operate a single point for both trip and close, or raise and lower, operations. The L60 can be configured to 
support paired control points, with each paired control point operating two virtual inputs. The 

DNP NUMBER OF PAIRED 

CONTROL POINTS

 setting allows configuration of 0 to 32 binary output paired controls. Points not configured as paired 

operate on a one-to-one basis.
The 

DNP TCP CONNECTION TIMEOUT

 setting specifies a time delay for the detection of dead network TCP connections. If 

there is no data traffic on a DNP TCP connection for greater than the time specified by this setting, the connection is 
aborted by the L60. This frees up the connection to be re-used by a client. For any change to take effect, restart the relay.

5.3.5.11  DNP / IEC 60870-5-104 point lists

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 



 DNP / IEC104 POINT LISTS

Up to 256 binary and up to 256 analog input points for the DNP protocol, or the MSP and MME points for IEC 60870-5-104 
protocol, can be configured. The value for each point is user-programmable and can be configured by assigning FlexLogic 
operands for binary inputs / MSP points or FlexAnalog parameters for analog inputs / MME points.

The L60 relay does not support energy metering. As such, the 

DNP ENERGY SCALE FACTOR

 and 

DNP ENERGY DEFAULT 

DEADBAND

 settings are not applicable.

Check the “DNP Points Lists” L60 web page to view the analog inputs and/or binary inputs points lists. This page 
can be viewed with a web browser by entering the IP address of the L60 Ethernet port employed to access the L60 
Main Menu, then by clicking the 

Device Information Menu

 item, then the

 DNP Points Lists

 item.

DNP / IEC104

POINT LISTS

BINARY INPUT / MSP

POINTS

See below

ANALOG INPUT / MME

POINTS

See below

Содержание L60

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

PIETRO FIORENTINI DELTAFLUX MT100 Technical Manual preview
DELTAFLUX MT100
Бренд: PIETRO FIORENTINI Страницы: 16
Y-Solar Smart-MPPT Li Series User Manual preview
Smart-MPPT Li Series
Бренд: Y-Solar Страницы: 6
Canarm MC Series Installation Manual preview
MC Series
Бренд: Canarm Страницы: 3
Faulhaber MC 5004 Technical Manual preview
MC 5004
Бренд: Faulhaber Страницы: 66
Samson 3354 Mounting And Operating Instructions preview
3354
Бренд: Samson Страницы: 40
Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Бренд: Harpo Страницы: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Бренд: Hardi Страницы: 2
ICP DAS USA MDC-700 Series Quick Start preview
MDC-700 Series
Бренд: ICP DAS USA Страницы: 4
ICP DAS USA I-7080 Quick Start Manual preview
I-7080
Бренд: ICP DAS USA Страницы: 6
ICP DAS USA EIP-2000 Series Faq preview
EIP-2000 Series
Бренд: ICP DAS USA Страницы: 19
Jedia JMA-5104 Operating Instructions Manual preview
JMA-5104
Бренд: Jedia Страницы: 12
JED Micro T470 User And Installation Manual preview
T470
Бренд: JED Micro Страницы: 10
JCM Technologies SESAME Rapid Installation Manual preview
SESAME
Бренд: JCM Technologies Страницы: 2
YUGE LCC Series Hardware Manual preview
LCC Series
Бренд: YUGE Страницы: 69
Quectel EC25 series Command Manual preview
EC25 series
Бренд: Quectel Страницы: 232
Quectel L76 Reference Design preview
L76
Бренд: Quectel Страницы: 9
Quectel BC26 Manual preview
BC26
Бренд: Quectel Страницы: 73
Vaillant VSMART User Manual preview
VSMART
Бренд: Vaillant Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды