manualshive.com logo in svg

GE L60, Инструкция по эксплуатации

У нас есть бесплатное руководство пользователя и установки для продукта N1C L60. Вы можете скачать его с нашего сайта manualshive.com. Получите подробные инструкции по использованию и установке этого товара, чтобы сделать процесс еще проще и удобнее.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

SYSTEM SETUP

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

5-149

5

The breaker control element contains the auxiliary logic for status and serves as the interface for opening and closing of a 
circuit breaker from protection, autoreclose, SCADA, or through the front panel interface. The breaker control element can 
be used to create interlocking functionality. For greater security in determination of the breaker position, both the 52/a and 
52/b auxiliary contacts are used with reporting of the discrepancy between them.
To use this element, configure the contact outputs that trip and close the breaker to use FlexLogic operands 

BREAKER 1 OFF 

CMD

 (or 

BREAKER 1 TRIP A/B/C

 in the case of single-pole tripping) and 

BREAKER 1 ON CMD

, and configure the breaker control 

element inputs as described here.
A description of the operation of the breaker control and status monitoring features from the front panel is provided in 
chapter 4.

There are two breaker control elements for each CT/VT module installed. The following settings are available for each 
breaker control element.

BREAKER 1 FUNCTION

 — This setting enables and disables the operation of the breaker 1 control feature.

BREAKER1 PUSH BUTTON CONTROL

 — Set to “Enable” to allow front panel pushbutton open/close control operations.

BREAKER1 TAGGING

 — Set to "Enable" to allow the graphical front panel to tag breaker 1. When tagged, the following 

operations are disabled: pushbutton open/close, IEC 61850 open/close, autoreclose command issued by the autoreclose 
element, and close command initiated by 

BREAKER 1 CLOSE

 setting. The trip command issued by the Trip Out element or 

BREAKER 1 OPEN

 setting is not affected.

BREAKER1 SUBSTITUTN

 — Set to "Enable" to allow the graphical front panel to substitute breaker 1 status. When substituted, 

breaker 1 control open/close status is forced to the substituted value.

BREAKER1 BYPASS

 — Set to "Enable" to allow the graphical front panel to bypass breaker 1 interlocking. When asserted, 

BREAKER 1 BLK OPEN

 and 

BREAKER 1 BLK CLOSE

 settings are bypassed.

BREAKER1 AR BLOCK

 — Set to "Enable" to allow the graphical front panel to issue a BLOCK AR command and generate the 

BREAKER 1 BLK RCLS

 operand, which blocks the breaker 1 close command from the Autoreclose element.

The autoreclose element operates for BKR1 and BKR2 only.
Once 

AR BLOCK

 is asserted from the front panel, the breaker reclosing is not allowed. Note that the autoreclose element is 

not automatically inhibited by 

BLOCK AR

 from the front panel. If the autoreclose scheme needs to be inhibited, set setting 

AR BLOCK BKR1

 or 

AR BLOCK

 in the autoreclose element with the 

BREAKER 1 BLK RCLS

 operand.

BREAKER 1 NAME

 — Assign a user-defined name (up to six characters) to the breaker. This name is used in flash messages 

related to breaker 1.

BREAKER 1 MODE

 — Selects “3-Pole” mode, where all breaker poles are operated simultaneously, or “1-Pole” mode where all 

breaker poles are operated either independently or simultaneously.

BREAKER 1 OPEN

 — Selects an operand that when activated, and unless blocked, initiates the Breaker 1 open and individual 

phase trip commands.

BREAKER 1 OUT OF SV:

Off

Range: FlexLogic operand

BREAKER 1 RACKED-IN:

Off

Range: FlexLogic operand

BREAKER 1 EVENTS:

Disabled

Range: Disabled, Enabled

Breaker control element 1 and Breaker control element 2 are permanently attached to Autoreclose element 
functions BKR1 and BKR2 respectively.

Breaker control element 1 is permanently attached to the Trip Output element.

Содержание L60

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L60

ABB Relion REC670 Product Manual preview
Relion REC670
Бренд: ABB Страницы: 138
ABB Relion REC670 Operator'S Manual preview
Relion REC670
Бренд: ABB Страницы: 116
ABB Relion 615 series Operation Manual preview
Relion 615 series
Бренд: ABB Страницы: 136
Tapeswitch C6 Technical Manual preview
C6
Бренд: Tapeswitch Страницы: 13
Quectel BG96 At Command Manual preview
BG96
Бренд: Quectel Страницы: 23
Quectel BG96 Hardware Design preview
BG96
Бренд: Quectel Страницы: 79
jcm-tech WAVE500 User Manual preview
WAVE500
Бренд: jcm-tech Страницы: 8
Lawler 801 Installation & Maintenance Manual preview
801
Бренд: Lawler Страницы: 4
QTP 10900 Quick Start Manual preview
10900
Бренд: QTP Страницы: 2
Parker CHELSEA Owner'S Manual preview
CHELSEA
Бренд: Parker Страницы: 32
Rayrun NT30 Quick Start Manual preview
NT30
Бренд: Rayrun Страницы: 4
PACH & COMPANY AeGIS 7000 Series Quick Start Manual preview
AeGIS 7000 Series
Бренд: PACH & COMPANY Страницы: 2
PACH & COMPANY AeGIS 4000 Quick Installation And Programming Manual preview
AeGIS 4000
Бренд: PACH & COMPANY Страницы: 4
vacuubrand CVC 3000 Instructions For Assembly preview
CVC 3000
Бренд: vacuubrand Страницы: 12
Vacon 100 INDUSTRIAL Installation And User Manual preview
100 INDUSTRIAL
Бренд: Vacon Страницы: 47
Vacon 100 flow Installation Instruction preview
100 flow
Бренд: Vacon Страницы: 40
YASKAWA U1000 iQpump Drive User Manual preview
U1000 iQpump Drive
Бренд: YASKAWA Страницы: 426
YASKAWA Motoman DX200 Safety Notes preview
Motoman DX200
Бренд: YASKAWA Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды