manualshive.com logo in svg

GE L30, Инструкция по эксплуатации

GE L30 - отличный продукт для вашего дома! Получите подробное руководство по эксплуатации с инструкцией по использованию бесплатно. Скачайте его с manualshive.com. Не упустите возможность узнать больше о вашем устройстве!

Поделиться
Скачать
background image

5-82

L30 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

For a Configurable Report to operate, its members must be selected (that is, its data set configured) and a client must open 
a connection to, configure, and enable its report control block. Control blocks and data sets can be pre-configured by 
sending the L30 a CID file. See the UR Family Communications Guide for details. EnerVista UR Setup also can be used to 
select the data set members and to pre-configure the control blocks.
Each buffered report has the following settings.

Buffered Report1 RptID

Range: 0 to 129 VisibleString characters
Default: empty string

The name of the report. The entered value sets the RptID value in Buffered Report1 messages, and it can be used by the 
client to discriminate Buffered Report1 messages from other messages. If the number of characters entered is zero, the 
value used for RptID in messages is an ObjectReference to the report's control block, that is, "<LDName>/
LLN0$BR$"BRCB01".

Buffered Report1 Name

Range: 0 to 32 VisibleString characters
Default: BRCB01

The entered value sets the report control block name value for Buffered Report1.

Buffered Report1 DatSet

Range: None, TT6DataSet1, TT6 DataSet2, …, TT3DataSet01, TT3DataSet02, …
Default: None

This setting selects the data set whose members' status is reported in Buffered Report1 messages using the UR Setup 
software designator for the data set. The IEC 61850 name of the data sets are configured in the Datasets panel, as 
described later.
An ObjectReference to the data set, which consists of the concatenation of the string "<LDName>/LLN0$" and the data 
set name, is used in the datSet field of report messages, and it can be used by the client to discriminate Buffered Report1 
messages from other messages.
The performance of the report is determined by the performance of the selected dataset. When the selection is 
TT3DataSet01, TT3DataSet02, … it is possible that transient events can be missed.
To configure a DataSet, select it at the top of the window from the drop-down list, for example DataSet02 shown in the 
previous figure. In the lower part of the window, drag and drop configuration items to the right side. For example select 
the 

ST Ind001 stVal

 item and drag it to DataSet Member 1. Dataset members configured here affect other Report or 

TxGOOSE control blocks that use the same DataSet.

Buffered Report1 ConfRev

Range: 0 to 4294967295 in steps of 1
Default: 1

The entered value sets the confRev value in Buffered Report1 messages, and it can be used by clients to discriminate 
report messages of the expected configuration revision from messages of a different revision. The standard requires 
that confRev be incremented each time the members or the order of the members is changed, and each time the data 
set name is changed. The standard states that the value of 0 is reserved.

Buffered Report1 OptFlds

Range: The check box for each individual bit can be enabled or not (see figure)
Default: All bits enabled/ true

The OptFlds setting is bitstring that controls which of the optional fields are included in report messages. The figure 
shows the available option bits. To reduce message size, uncheck any fields that are not needed.

Содержание L30































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для L30

VADDIO EVI-D70 Installation And User Manual preview
EVI-D70
Бренд: VADDIO Страницы: 2
HANYOUNG NUX TS500 Manual preview
TS500
Бренд: HANYOUNG NUX Страницы: 56
IDTECK iTDC Troubleshooting Manual preview
iTDC
Бренд: IDTECK Страницы: 94
Parkside PDWE 8 A1 Instructions Manual preview
PDWE 8 A1
Бренд: Parkside Страницы: 86
Lab.gruppen LAB.LEVEL4 Quick Start Manual preview
LAB.LEVEL4
Бренд: Lab.gruppen Страницы: 2
NEC uPD78F4225Y Manual preview
uPD78F4225Y
Бренд: NEC Страницы: 30
Gemini GTL5W Instruction Manual preview
GTL5W
Бренд: Gemini Страницы: 9
M-system R7EWTU Instruction Manual preview
R7EWTU
Бренд: M-system Страницы: 18
asalvo baby 16614 Instruction Manual preview
16614
Бренд: asalvo baby Страницы: 84
GEM DG-2000 Series Operation Manual preview
DG-2000 Series
Бренд: GEM Страницы: 17
SMC Networks VTA301 Series Operation Manual preview
VTA301 Series
Бренд: SMC Networks Страницы: 10
DAY 72847 Instruction Manual preview
72847
Бренд: DAY Страницы: 23
YASKAWA Lift Inverter L1000V Technical Manual preview
Lift Inverter L1000V
Бренд: YASKAWA Страницы: 282
olympia electronics BS-316 Installation & Operation Manual preview
BS-316
Бренд: olympia electronics Страницы: 22
Comunello CU-24V-1M Installation And User Manual preview
CU-24V-1M
Бренд: Comunello Страницы: 13
OBaby Disney Winnie The Pooh Buggy Instruction Manual preview
Disney Winnie The Pooh Buggy
Бренд: OBaby Страницы: 7
Hide-A-Hose HS5000 Installation Manual preview
HS5000
Бренд: Hide-A-Hose Страницы: 13
Sorel SBMC Installation And Operating Instructions Manual preview
SBMC
Бренд: Sorel Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды