13-17-613 Page 31
5.1.2 Load/Unload Setpoints
Accessibility
Maintenance
Distributor
Factory
The
Load/Unload Setpoints
menu is the next category under the
Operational Settings
menu. These
setpoints establish target and loading pressures for changing the baseline configuration of the unit.
This menu gives the user the ability to change the pressure set points and the operating mode while
the compressor is running or stopped.
The
Load/Unload Setpoints
menu structure is organized as follows:
5.1.2.1 Target Pressure
Accessibility
Maintenance
Distributor
Factory
The first item in the
Load/Unload Setpoints
menu is the
Target Pressure
. This value is the pressure
set point of the compressor.
Min Value: Load Pressure setting
Max Value: Unload Pressure setting - 5 PSI (0.3 bar)
Default Value: Package-dependent
5.1.2.2 Unload Pressure
Accessibility
Maintenance
Distributor
Factory
The next item in the
Load/Unload Setpoints
is the
Unload Pressure
. This pressure value is where
the compressor will unload and begin the unload/blowdown sequence.
Min Value: Target Pr 5 PSI (0.3 bar)
Max Value: Advisory Pressure Setting - 5 PSI (0.3 bar)
Default Value: Package-dependent
5.1.2.3 Load Pressure
Accessibility
Maintenance
Distributor
Factory
The next item in the
Load/Unload Setpoints
menu is the
Load Pressure
. This pressure value is
where the compressor will load again after an unload/blowdown sequence.
Min Value: Min Target Pressure setting
Max Value: Target Pressure
Default Value: Package-dependent
Содержание AIRSMART
Страница 26: ...13 17 613 Page 25 Figure 3 9 Overall Menu Structure...
Страница 78: ...NOTES...
Страница 79: ...NOTES...